Why This Matters
Single-pane windows — still common in California homes built before 1980 — have almost no thermal resistance. Low-e retrofit film can cut their solar heat gain by 40–60% at a fraction of the cost of replacement.
Near Semper Solaris in Irvine, south- and west-facing windows receive the most direct solar load and benefit most from film. This is especially problematic for multi-family residence installations, which condos and apartment buildings benefit from film to reduce hvac load and improve tenant comfort.
The marine layer that covers coastal California in the morning burns off by midday, leaving afternoons with intense, direct sunlight. West-facing rooms without film are at their hottest between 2pm and 5pm.
The Solution
The installation process is non-invasive: clean the glass, apply the film with a slip solution, squeegee out air pockets, and trim to fit. No construction, no permits, no disruption.
Perforated film solves the privacy-versus-light tradeoff for street-facing rooms. The micro-hole pattern maintains outward visibility from inside while blocking the view from outside during daylight hours.
Blocks high-heat solar wavelengths to reduce interior temperatures and UV exposure.
Climate & Solar Performance
Properties near Semper Solaris in Quail Hill, Irvine experience south & west exposure conditions that make window film particularly effective. Solar Control Window Film is specifically engineered to address this solar exposure.
Effective against south & west exposure
Rated for multi-family residence protection
Professional installers available in Irvine
10–15 year manufacturer warranty
Installation Guide
Installation cost varies by window size, film grade, and local labor rates. Expect $8–$15 per square foot installed for quality solar control or ceramic films. A typical residential window runs $150–$400.
Install time
30–45 min
Per window
$150–$400
Cure time
30 days