Why This Matters
Single-pane windows — still common in California homes built before 1980 — have almost no thermal resistance. Low-e retrofit film can cut their solar heat gain by 40–60% at a fraction of the cost of replacement.
Near Aurora Development in Pasadena, south- and west-facing windows receive the most direct solar load and benefit most from film. This is especially problematic for historic or older home installations, which older single-pane windows benefit most from low-e retrofit film to improve thermal efficiency.
The marine layer that covers coastal California in the morning burns off by midday, leaving afternoons with intense, direct sunlight. West-facing rooms without film are at their hottest between 2pm and 5pm.
The Solution
The installation process is non-invasive: clean the glass, apply the film with a slip solution, squeegee out air pockets, and trim to fit. No construction, no permits, no disruption.
Perforated film solves the privacy-versus-light tradeoff for street-facing rooms. The micro-hole pattern maintains outward visibility from inside while blocking the view from outside during daylight hours.
Micro-perforated pattern provides one-way privacy and solar control without blocking the view.
Climate & Solar Performance
Properties near Aurora Development in City of Pasadena Permit Center (Planning & Community Development Department), Pasadena experience south & west exposure conditions that make window film particularly effective. Perforated Window Film is specifically engineered to address this solar exposure.
Effective against south & west exposure
Rated for historic or older home protection
Professional installers available in Pasadena
10–15 year manufacturer warranty
Installation Guide
Film curing takes 30 days after installation. During this period, you may notice small water bubbles or a hazy appearance — this is normal and will resolve completely as the adhesive cures.
Install time
30–45 min
Per window
$150–$400
Cure time
30 days